Wednesday, June 6, 2012

rsc issue on e220R

I have e220R server running with solaris10 on it.I want to configure rsc on it so had the hardware inserted in the box.Can i configure rsc by redirecting the output-device to ttya with the rsc hardware present on the box.






I had the rsc inserted in the box .I connected the server to ttya by putty 
serial on my laptop , but still by default it is redirectiong to rsc . What 
i can see it he login prompt. i'm not aware whether it is configured or not. 
I dont have username/password of rsc . Is there any way i can break the root 
password of rsc. Server is E220R. 
Ok. 
If the Monitor, Keyboard is connected to the Server then give the Power Drain to the Server for 15Min and while the POST is running press STOP N button continuosly. This will set your input and output as keyboard and screen. 

And if the Monitor is not connected then connect your laptop through serial mgt port of the Server and change the input-device and output-device and still if you face the problem then Switch off the Server with the removal of Power Cable for 10-15 min and then connect your laptop with ttya and give a hard power-on to the Server. You will get the output to the laptop after the completion of the POST. 
I have powered down E220R and removed the rsc fromt the box as it is getting redirected by default.Then changed the input-device , output-device to ttya on OBP and powered down the machine.Now inserted the RSC in and tried to access the output through putty serial . Still the same problem .... the server is completing its post ant getting stopped at RSC login Prompt.I'm not understanding why even after redireting the input/output device to ttya ....still the rsc is getting the first preference. 
Hi, 

After redirecting the rsc card where ru inserting to get the console? If you 
are connecting to the serial port which is on rsc card then it will 
definitely show you the rsc prompt. What is the Status of your Server is it 
up or down. If it is up and running then login to the Server with the 
telnet/ssh session and chk #eeprom input-device and #eeprom output-device 
command output. 

Hope this will clear your doubt and also help u in resolving the issue. In 
case of any query please feel free to contact. 
Hi, 

After redirecting the rsc card where ru inserting to get the console? If you 
are connecting to the serial port which is on rsc card then it will 
definitely show you the rsc prompt. What is the Status of your Server is it 
up or down. If it is up and running then login to the Server with the 
telnet/ssh session and chk #eeprom input-device and #eeprom output-device 
command output. 

Hope this will clear your doubt and also help u in resolving the issue. In 
case of any query please feel free to contact. 


More Information:





0 comments:

Post a Comment

 
Design by BABU | Dedicated to grandfather | welcome to BABU-UNIX-FORUM